ITEMS FOR SALE

 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SB-200 Heath Amp
Has inrush current protection
Has Solid State keying relay (will work with modern XCVRS)
Tubes are biased off with no modulation
Includes 10M
Input tuned now for 80M and 40M (other bands will need inputs
tuned for modern radios that require less than 3:1 SWR on
output but will work with transmatch and old tube-type radios)
New 572B tubes
Output 600W+
Asking $450 but will consider trade for less (includes manual, etc.)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Info-Tech CW Keyboard
Has 250 character send buffer, with “gas gauge” send-ahead meter
Will work up to about 75WPM, maybe higher depending on XCVR
Good working condition, no issues...!
Asking $150 (original price nearly $300)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2M J-Poles
Over 5dB gain
Covers entire 2M band
Rated at 300+ Watts
SO-239 input
Rust/Weather-resistant — solid aluminum and stainless steel construction
Asking $30 each but will consider less...

Bob      KK5R    nocrud222@yahoo.com     916-281-4809 Cell

 
 Tektronix lab-grade oscilloscope model 545 with dual trace plug-in.
Looks very good. Much better than most minimal o'scopes out there.
It is type used in electronic research labs or for repair and calibration of
other test equipment. This o'scope may be good thing for someone who
wants a good piece of test equipment for repeater equipment maintenance
and repair. Would not sell but I'm running out of space...
Asking $100 but will consider less for serious electronic technician.



Items to make a B&W TTFD (folded dipole) HF antenna that will be usable
from 80M thru 10M including all WARC bands and lower 2 MHz of 6M. Actually
starts at less than 2:1 SWR at about 3 MHz thru about 32 MHz continuous.
This is an excellent, low-noise antenna that eliminates need for antenna tuner.
Consists of a new 12:1 balun rated at 2KW and resistors to make 600 Ohm
termination. Will also provide PVC separators for antenna and diagram that
shows all dimensions. Will assist anyone who buys the antenna components to
get it together including providing the #14 stranded wire that comes from a new reel.
All components needed except coax and support rope which can be 100 Ft of
3/8 poly rope from True Value for less then $10 (not provided with other parts).
Asking $50 for all.

        Bob      KK5R    nocrud222@yahoo.com     916-281-4809 Cell